Offshore N2K holdingtank transfer display

Artikelnummer: 3350-HTPO

Prijs op aanvraag

Artikelnummer: 3350-HTPO Categorie:

Kenmerken: NMEA 2000 holdingtankmeter met digitale weergave, alarm en bedienknoppen. Met 10A relays voor alarmschakelingen.
Afm. (mm): 68
Inbouwdiepte (mm): 60
Voltage (V): 9 – 30
IP: 66
PGNs: 127505
Kleur: zwart

The new 3350-HTPO Holding Tank Pump Out Controller displays the holding tank level on a standard 2″ Panel Gauge.
The green START button manually starts the pump out where and when allowed. The unit automatically stops the pump out when the tank is empty to avoid the pumps running dry. The user can also stop the pump out at any time by pressing the STOP button.

The 3350-HTPO is fitted with a 10 amp relay to control the pump out pump. The unit mounts in a standard 2″ diameter panel hole and the front and panel seal is to IP67.
It has a red LED lamp that flashes when the pump out is in progress and a blue LED holding tank level display that varies in brightness as the ambient light level varies.
It attaches to the NMEA2000® network using a single “Micro” plug. It draws less than 150mA from the network.
The 3350-HTPO Holding Tank Pump Out Controller simplifies the holding tank pump out procedure and protects the pumps from being damaged by running dry.

Offshore 3350 HTPO Datasheet